Skip to content
Sag Harbor Masonry Co.

Town of Southampton

Pool Decks & Coping in Water Mill, NY

Pool coping in Water Mill runs about $25–50 per linear foot in bluestone and $20–45 in travertine, and a pool deck $22–32 per square foot in pavers, $30–45 in bluestone and $40–65 in granite or limestone (2026 Long Island contractor figures). The deck must satisfy New York’s 48-inch barrier code. We put Water Mill homeowners in touch with one licensed, insured mason who works the town, sets the coping first, and builds the deck to drain.

Last updated · Reviewed by Sag Harbor Masonry Co.

A pool deck in Water Mill is a patio with a barrier code, a pool contractor’s schedule and a lot of water in the ground. We put Water Mill homeowners in touch with one licensed, insured mason who works the town and sets coping every season, and we publish the 2026 Long Island ranges by material so the quote reads plainly.

Pool decks in Water Mill: what's different here

Estates around Mecox Bay and Flying Point on wet, flat ground, older farmhouses along Montauk Highway and Halsey Lane, and wooded 1990s–2010s neighborhoods north of the highway toward Deerfield Road whose first patios, pool decks and paver drives are reaching the age where joints open and coping lifts.

Water Mill runs from open, salt-exposed ground near the water to wooded inland lots, and the deck changes with it: sealing and salt-tolerant hardware near the coast, root-proof base and shade-friendly stone under the trees, and in either case a barrier that meets the 48-inch code and a deck pitched away from the pool.

Water Mill filled in from the 1990s through the 2010s, so a large stock of first-generation patios, pool decks and paver drives is due for new polymeric sand (3–7 years), resealing (2–4 years) and, where the base was thin, relaying. Water Mill is in the Town of Southampton, so permits run through the Town Building Division rather than a village board, which keeps a permitted retaining wall or pool deck simpler than in the villages.

Permits in Water Mill run through the Town of Southampton Building Division; the mason we put you in touch with handles the filing where one is required.

How it works

Tell us about the job once. One licensed, insured mason who works Water Mill and handles pool decks regularly contacts you within 1 business day. Free for homeowners, no spam calls.

FAQ

Pool decks questions

Does bluestone need to be sealed?

Not to survive, but usually yes to stay clean. Bluestone absorbs less than 2% water (the best varieties under 0.5%), which is why it handles Long Island freeze-thaw unsealed. Sealing protects against stains, salt and efflorescence. The rule is the type: a penetrating silane or siloxane sealer that lets the stone breathe, never a film-forming sealer, which traps moisture under the surface and flakes it off in winter. Typical cadence for a natural-stone patio is every 2–4 years, closer to 3 near the water or around a pool, at roughly $1–2 per square foot for a terrace and $3–5 per linear foot for coping. Polymeric sand in the joints is a separate item, redone every 3–7 years.

Thermal vs natural cleft bluestone: which should I use?

Natural cleft is bluestone split along its bedding plane: a textured, slightly uneven face with better grip when wet, less quarry work, and a material price of about $6–11 per square foot. Thermal (flamed) bluestone is heat-treated to a flat, uniform surface: cleaner to lay, easier to sweep, more formal, and about $9–14 per square foot in material because of the extra quarry labor. Both are the same stone, a feldspathic sandstone from the Catskills and northeastern Pennsylvania that absorbs under 2% water, so both survive Long Island winters. Use cleft where feet are wet, around pools and on shaded walks; use thermal for dining terraces and where an architect wants straight lines. Full-color and blue-blue grades are a color decision, not a durability one.

Read the full answer →
How much does a bluestone patio cost in the Hamptons?

About $20–50 per square foot installed on Long Island in 2026: the two Long Island contractor sources we found say $20–40 and $30–50, and the national blend is $16–38 (average $17–25). A 400 sq ft terrace is therefore roughly $8,000–20,000 and a 600 sq ft one $12,000–30,000, before steps, seat walls, an outdoor kitchen (national average about $13,180) or drainage. Material is a small part of it: natural cleft bluestone is $6–11 per square foot and thermal $9–14, and thicker stone adds $2–6. The rest is labor and base, and one installer puts site preparation at about 90% of the labor hours. Hamptons quotes sit at the top of the range when access is tight, the pattern is complex or the stone is select blue-blue.

Read the full answer →

All 6 questions →

Book a mason in Water Mill

Sixty seconds. One licensed, insured mason who works your town calls you within one business day. Free for homeowners; nobody else gets your number.

Street address or nearest cross street, plus the town.

We use what you send us only to put you in touch with the right mason. Never sold, never used for marketing. Privacy policy.

Call (631) 859-7815Book a mason