Skip to content
Sag Harbor Masonry Co.

Town of Southampton

Pool Decks & Coping in Bridgehampton, NY

Pool coping in Bridgehampton runs about $25–50 per linear foot in bluestone and $20–45 in travertine, and a pool deck $22–32 per square foot in pavers, $30–45 in bluestone and $40–65 in granite or limestone (2026 Long Island contractor figures). The deck must satisfy New York’s 48-inch barrier code. We put Bridgehampton homeowners in touch with one licensed, insured mason who works the town, sets the coping first, and builds the deck to drain.

Last updated · Reviewed by Sag Harbor Masonry Co.

A pool deck in Bridgehampton is a patio with a barrier code, a pool contractor’s schedule and a lot of water in the ground. We put Bridgehampton homeowners in touch with one licensed, insured mason who works the town and sets coping every season, and we publish the 2026 Long Island ranges by material so the quote reads plainly.

Pool decks in Bridgehampton: what's different here

Farmhouses and village Victorians along Main Street with brick stoops and old walls, estates on Ocean Road and around Mecox Bay with pool decks, gravel courts and long Belgian-block edges, and horse-country properties on the moraine north of the highway.

Bridgehampton runs from open, salt-exposed ground near the water to wooded inland lots, and the deck changes with it: sealing and salt-tolerant hardware near the coast, root-proof base and shade-friendly stone under the trees, and in either case a barrier that meets the 48-inch code and a deck pitched away from the pool.

In the historic parts of Bridgehampton, a pool terrace visible from the street or a neighbor needs review before work starts; the mason should raise it first.

Bridgehampton silt loam, the outwash-plain soil south of the highway, is the type soil the USDA named for the hamlet in 1928: well drained, silty over sand and gravel, and commonly saturated in its lower layers in winter, spring and after heavy rain, which sets the base and drainage for every patio and drive. Bridgehampton's Main Street is a Town of Southampton historic overlay district (the Bull's Head–Main Street Historic Overlay District) with its own design guidelines, which is more than a National Register listing: visible changes on Main Street are reviewed.

Permits in Bridgehampton run through the Town of Southampton Building Division; Main Street sits inside the Town's Bull's Head–Main Street Historic Overlay District, which carries its own design guidelines; the mason we put you in touch with handles the filing where one is required.

How it works

Tell us about the job once. One licensed, insured mason who works Bridgehampton and handles pool decks regularly contacts you within 1 business day. Free for homeowners, no spam calls.

FAQ

Pool decks questions

Does bluestone need to be sealed?

Not to survive, but usually yes to stay clean. Bluestone absorbs less than 2% water (the best varieties under 0.5%), which is why it handles Long Island freeze-thaw unsealed. Sealing protects against stains, salt and efflorescence. The rule is the type: a penetrating silane or siloxane sealer that lets the stone breathe, never a film-forming sealer, which traps moisture under the surface and flakes it off in winter. Typical cadence for a natural-stone patio is every 2–4 years, closer to 3 near the water or around a pool, at roughly $1–2 per square foot for a terrace and $3–5 per linear foot for coping. Polymeric sand in the joints is a separate item, redone every 3–7 years.

Thermal vs natural cleft bluestone: which should I use?

Natural cleft is bluestone split along its bedding plane: a textured, slightly uneven face with better grip when wet, less quarry work, and a material price of about $6–11 per square foot. Thermal (flamed) bluestone is heat-treated to a flat, uniform surface: cleaner to lay, easier to sweep, more formal, and about $9–14 per square foot in material because of the extra quarry labor. Both are the same stone, a feldspathic sandstone from the Catskills and northeastern Pennsylvania that absorbs under 2% water, so both survive Long Island winters. Use cleft where feet are wet, around pools and on shaded walks; use thermal for dining terraces and where an architect wants straight lines. Full-color and blue-blue grades are a color decision, not a durability one.

Read the full answer →
How much does a bluestone patio cost in the Hamptons?

About $20–50 per square foot installed on Long Island in 2026: the two Long Island contractor sources we found say $20–40 and $30–50, and the national blend is $16–38 (average $17–25). A 400 sq ft terrace is therefore roughly $8,000–20,000 and a 600 sq ft one $12,000–30,000, before steps, seat walls, an outdoor kitchen (national average about $13,180) or drainage. Material is a small part of it: natural cleft bluestone is $6–11 per square foot and thermal $9–14, and thicker stone adds $2–6. The rest is labor and base, and one installer puts site preparation at about 90% of the labor hours. Hamptons quotes sit at the top of the range when access is tight, the pattern is complex or the stone is select blue-blue.

Read the full answer →

All 6 questions →

Book a mason in Bridgehampton

Sixty seconds. One licensed, insured mason who works your town calls you within one business day. Free for homeowners; nobody else gets your number.

Street address or nearest cross street, plus the town.

We use what you send us only to put you in touch with the right mason. Never sold, never used for marketing. Privacy policy.

Call (631) 859-7815Book a mason