Skip to content
Sag Harbor Masonry Co.

Town of Southampton

Bluestone Patios & Walkways in Water Mill, NY

A bluestone patio in Water Mill runs about $20–50 per square foot installed (2026 Long Island contractor ranges), so 400–600 sq ft is roughly $8,000–30,000 before steps, walls or drainage, and takes a crew 4–5 days. We put Water Mill homeowners in touch with one licensed, insured mason who works the town, sets the base for its soil and frost, and lays 1½–2 inch stone dry so it moves with the ground instead of cracking.

Last updated · Reviewed by Sag Harbor Masonry Co.

A bluestone patio in Water Mill is a five-figure decision that lives or dies on the base under it. We put Water Mill homeowners in touch with one licensed, insured mason who works the town and its soil, and we publish the 2026 Long Island ranges per square foot so you can read the quote when it arrives.

Bluestone patios in Water Mill: what's different here

Estates around Mecox Bay and Flying Point on wet, flat ground, older farmhouses along Montauk Highway and Halsey Lane, and wooded 1990s–2010s neighborhoods north of the highway toward Deerfield Road whose first patios, pool decks and paver drives are reaching the age where joints open and coping lifts.

Water Mill runs from open, salt-exposed ground near the water to wooded inland lots, and the base changes with it: fast-draining outwash sand on one side, till with clay lenses and boulders on the other. A mason who works both sides of Water Mill sets the base depth and drainage for the lot, not from a rule of thumb.

The bay side of Water Mill, Mecox, Flying Point and Cobb Road, has a high water table and falls under the Town of Southampton's 125-foot wetland setback for structures and the Town Trustees' jurisdiction over Mecox Bay; the Deerfield side is wooded moraine. Water Mill filled in from the 1990s through the 2010s, so a large stock of first-generation patios, pool decks and paver drives is due for new polymeric sand (3–7 years), resealing (2–4 years) and, where the base was thin, relaying.

Permits in Water Mill run through the Town of Southampton Building Division; the mason we put you in touch with handles the filing where one is required.

How it works

Tell us about the job once. One licensed, insured mason who works Water Mill and handles bluestone patios regularly contacts you within 1 business day. Free for homeowners, no spam calls.

FAQ

Bluestone patios questions

How much does a bluestone patio cost in the Hamptons?

About $20–50 per square foot installed on Long Island in 2026: the two Long Island contractor sources we found say $20–40 and $30–50, and the national blend is $16–38 (average $17–25). A 400 sq ft terrace is therefore roughly $8,000–20,000 and a 600 sq ft one $12,000–30,000, before steps, seat walls, an outdoor kitchen (national average about $13,180) or drainage. Material is a small part of it: natural cleft bluestone is $6–11 per square foot and thermal $9–14, and thicker stone adds $2–6. The rest is labor and base, and one installer puts site preparation at about 90% of the labor hours. Hamptons quotes sit at the top of the range when access is tight, the pattern is complex or the stone is select blue-blue.

Read the full answer →
Thermal vs natural cleft bluestone: which should I use?

Natural cleft is bluestone split along its bedding plane: a textured, slightly uneven face with better grip when wet, less quarry work, and a material price of about $6–11 per square foot. Thermal (flamed) bluestone is heat-treated to a flat, uniform surface: cleaner to lay, easier to sweep, more formal, and about $9–14 per square foot in material because of the extra quarry labor. Both are the same stone, a feldspathic sandstone from the Catskills and northeastern Pennsylvania that absorbs under 2% water, so both survive Long Island winters. Use cleft where feet are wet, around pools and on shaded walks; use thermal for dining terraces and where an architect wants straight lines. Full-color and blue-blue grades are a color decision, not a durability one.

Read the full answer →
Does bluestone need to be sealed?

Not to survive, but usually yes to stay clean. Bluestone absorbs less than 2% water (the best varieties under 0.5%), which is why it handles Long Island freeze-thaw unsealed. Sealing protects against stains, salt and efflorescence. The rule is the type: a penetrating silane or siloxane sealer that lets the stone breathe, never a film-forming sealer, which traps moisture under the surface and flakes it off in winter. Typical cadence for a natural-stone patio is every 2–4 years, closer to 3 near the water or around a pool, at roughly $1–2 per square foot for a terrace and $3–5 per linear foot for coping. Polymeric sand in the joints is a separate item, redone every 3–7 years.

All 6 questions →

Book a mason in Water Mill

Sixty seconds. One licensed, insured mason who works your town calls you within one business day. Free for homeowners; nobody else gets your number.

Street address or nearest cross street, plus the town.

We use what you send us only to put you in touch with the right mason. Never sold, never used for marketing. Privacy policy.

Call (631) 859-7815Book a mason