Skip to content
Sag Harbor Masonry Co.

Village of Sag Harbor

Pool Decks & Coping in Sag Harbor, NY

Pool coping in Sag Harbor runs about $25–50 per linear foot in bluestone and $20–45 in travertine, and a pool deck $22–32 per square foot in pavers, $30–45 in bluestone and $40–65 in granite or limestone (2026 Long Island contractor figures). The deck must satisfy New York’s 48-inch barrier code. We put Sag Harbor homeowners in touch with one licensed, insured mason who works the town, sets the coping first, and builds the deck to drain.

Last updated · Reviewed by Sag Harbor Masonry Co.

A pool deck in Sag Harbor is a patio with a barrier code, a pool contractor’s schedule and a lot of water in the ground. We put Sag Harbor homeowners in touch with one licensed, insured mason who works the town and sets coping every season, and we publish the 2026 Long Island ranges by material so the quote reads plainly.

Pool decks in Sag Harbor: what's different here

Dense, steep village lots with 18th- and 19th-century whaling-era houses on soft brick foundations and stoops, low mortared walls at the sidewalk, and newer houses on the moraine out toward Noyac and the bay.

In Sag Harbor the high water table near the harbor and the humid salt air make the base and drainage the whole job under the stone, and the historic district’s review board looks at terraces visible from the street. Lots are tight, so staging the pallets of stone is part of the plan.

In the historic parts of Sag Harbor, a pool terrace visible from the street or a neighbor needs review before work starts; the mason should raise it first.

The Sag Harbor Village Historic District covers most of the old village, and the review board's scope explicitly names sidewalks, aprons, driveways, terraces, retaining walls and curbing visible from a street or neighbor: a Certificate of Appropriateness comes before the building permit. Entry gates in the historic district are capped at 4 feet in the front yard and 6 feet at the sides and rear (4 feet front and rear on waterfront lots).

Permits in Sag Harbor run through the Village of Sag Harbor Building Department; in the historic district, a Certificate of Appropriateness from the Board of Historic Preservation and Architectural Review comes first for any exterior change visible from a street or neighbor, and its scope names sidewalks, aprons, driveways, terraces, retaining walls and curbing; the mason we put you in touch with handles the filing where one is required.

How it works

Tell us about the job once. One licensed, insured mason who works Sag Harbor and handles pool decks regularly contacts you within 1 business day. Free for homeowners, no spam calls.

FAQ

Pool decks questions

Does bluestone need to be sealed?

Not to survive, but usually yes to stay clean. Bluestone absorbs less than 2% water (the best varieties under 0.5%), which is why it handles Long Island freeze-thaw unsealed. Sealing protects against stains, salt and efflorescence. The rule is the type: a penetrating silane or siloxane sealer that lets the stone breathe, never a film-forming sealer, which traps moisture under the surface and flakes it off in winter. Typical cadence for a natural-stone patio is every 2–4 years, closer to 3 near the water or around a pool, at roughly $1–2 per square foot for a terrace and $3–5 per linear foot for coping. Polymeric sand in the joints is a separate item, redone every 3–7 years.

Thermal vs natural cleft bluestone: which should I use?

Natural cleft is bluestone split along its bedding plane: a textured, slightly uneven face with better grip when wet, less quarry work, and a material price of about $6–11 per square foot. Thermal (flamed) bluestone is heat-treated to a flat, uniform surface: cleaner to lay, easier to sweep, more formal, and about $9–14 per square foot in material because of the extra quarry labor. Both are the same stone, a feldspathic sandstone from the Catskills and northeastern Pennsylvania that absorbs under 2% water, so both survive Long Island winters. Use cleft where feet are wet, around pools and on shaded walks; use thermal for dining terraces and where an architect wants straight lines. Full-color and blue-blue grades are a color decision, not a durability one.

Read the full answer →
How much does a bluestone patio cost in the Hamptons?

About $20–50 per square foot installed on Long Island in 2026: the two Long Island contractor sources we found say $20–40 and $30–50, and the national blend is $16–38 (average $17–25). A 400 sq ft terrace is therefore roughly $8,000–20,000 and a 600 sq ft one $12,000–30,000, before steps, seat walls, an outdoor kitchen (national average about $13,180) or drainage. Material is a small part of it: natural cleft bluestone is $6–11 per square foot and thermal $9–14, and thicker stone adds $2–6. The rest is labor and base, and one installer puts site preparation at about 90% of the labor hours. Hamptons quotes sit at the top of the range when access is tight, the pattern is complex or the stone is select blue-blue.

Read the full answer →

All 6 questions →

Book a mason in Sag Harbor

Sixty seconds. One licensed, insured mason who works your town calls you within one business day. Free for homeowners; nobody else gets your number.

Street address or nearest cross street, plus the town.

We use what you send us only to put you in touch with the right mason. Never sold, never used for marketing. Privacy policy.

Call (631) 859-7815Book a mason